Like most people, you are probably more familiar with a round back stud. Thus, if you need to remove a nose stud with a flat back, you may find yourself struggling a bit.
In this case, here are all the guidelines that you need to get the job done.
How Can You Remove a Nose Stud with a Flat Back?
Depending on the style of jewelry, the nose stud can be removed by either unscrewing one end of the stud from the other by pulling apart and separating the stud from the bar – it is important to use as little force as possible during the process.
How to Remove a Threaded Nose Stud?
With these types of nose studs, the jewel or stud screws into the bar section. Before you attempt to remove your stud, first wash your hands with soap and water or sanitize them. Make sure your hands are dry so that they don’t slip when you attempt to take the stud out.
Now, your hand on the opposite side of your nostril with the piercing will hold the back of the stud in place. This means that if your stud is in your right nostril, your left hand will hold the stud. You will need to fit one or more fingers inside your nostril for this.
Once the stud is held in place, use your other hand to twist the jewel or the stud in a counter clockwise motion. This means turn the stud towards the left hand side. The jewel should begin to move in a circular motion.
As you continue this motion, lift the stud upwards. If you find this difficult to do with just one hand, then wait until you are sure that the stud is completely unscrewed and then pull the jewel upwards or pull both sections apart.
How to Remove a Threadless Nose Stud?
With this type of stud, the jewel or stud is attached to a bar and this bar is fitted inside the bar that is attached to the flat back.
Due to this, you should be able to remove the pieces with a simple pulling motion. Take the hand opposite the nostril that is pierced and hold onto the base. You can use tweezers instead but make sure to sanitize them first.
Then, grasp the jewel and the flat back apart. Remember to do this gently. If the stud appears to be stuck, then twist it around a bit before pulling it apart.
Can You Remove a Flat Back Nose Stud By Yourself?
You should be able to do this by yourself. However, if your nostril piercing is relatively new or if the two pieces appear to be stuck together, then it is a good idea to get some help.
You may find it easier to simply hold the flat back in place while someone else unscrews the top portion or pulls it apart.
If you are getting someone else to help, be aware of the pressure or force against your nostril. If it hurts or the pressure is too great, tell the person is assisting you. The last thing that you need is to get hurt during the process.
What if the Flat Back Stud is Stuck?
Unless one portion has been damaged during the process of getting the stud in, it is unlikely that the stud is stuck. Still, you may be having trouble getting the two pieces apart.
If the stud or the bar feels slick to the touch, wipe it off first. Make sure your hands are dry as well.
Make sure that you are in a well lit area and can see what you are doing. It may be helpful for someone to shine a light up your nostril to make sure that you that the right steps are being taken.
Some people do find it easier to use tweezers as they can get a better grip inside your nostril than your fingers can. Be careful when doing this as you don’t want to accidentally grab the sensitive skin inside your nose.
Carefully trying unscrewing or pulling the stud apart once more. Stop if it feels like your nostril feels sore or if the piercing is painful. If you aren’t careful, you could end up causing irritation at the area, causing swelling. This can make it even more difficult to remove the stud.
When Should You Visit Your Piercer?
Don’t wait until the situation is too bad to go see your piercer. If you and your friends have tried a couple of times and it appears to be stuck then it is time to call in the professionals.
Not only will they be able to remove it without causing irritation to the site, they will also show you the right method for future use.
How to Remove a Flat Back Nose Stud?
To remove this type of stud, you can either unscrew one end while holding the other part still – if it is a threadless stud, though, you can pull the jewel portion upwards and outwards – if you are having trouble, make sure to ask a professional for help.
Additional Tips for Removing a Nose Stud with a Flat Back
If you’re struggling to remove a nose stud with a flat back here are a few additional tips that may help.
First try applying a small amount of Vaseline or another lubricant around the hole and on the flat back of the stud.
This can help reduce friction and make it easier to slide the stud out.
Another trick is to gently wiggle the stud back and forth while pulling it out as this can help loosen it from the hole.
If all else fails it’s best to visit a professional piercer who can safely remove the stud without causing any damage or discomfort.
Remember it’s important to be patient and gentle when removing a nose stud to avoid any complications or injuries.
